Topends

Inlet assembly weld failures

The standard adopted for the examination of Reformer Tubes in Steam Methane Reformers (SMR) has been to inspect the heated length of the tube within the furnace. The portion of the tube outside of the heated length is normally not inspected after being in service. However, recent trends have changed that perspective due to internal defects encountered in these portions of the top ends. These defects have been found in two completely different design arrangements which will be described separately as Case I and Case II.

Inspection of Topends (EN)

Case I - Top Fired / Down Flow:

In these reformer designs, the burners are top fired with a down flow process. The inlet gas is injected through a pigtail into the tube above the furnace radiant box in the penthouse. The unheated tube top section is made of wrought material with metallurgies ranging from low-chrome alloy steel (1.25 Cr - 0.5 Mo) to stainless steel 304H, 347H, or similar materials while the heated length within the furnace is a centrifugally cast material mostly 25Cr/35Ni/Nb or with Micro-alloy additions. For further details see Figure 1.

During transient and cold weather conditions, the temperature of the tube top flange can drop below the process gas dew point resulting in condensation in the area shown in “black”. The process gas dew point is typically in a range of around 300-400 °F.

Case II - Bottom Fired / Up Flow:

In these reformer designs, the reformer is bottom fired with an up-flow process. The inlet gas is injected from the bottom of the tube through an inlet pigtail and the reformed gas comes out from the top of the tube through an outlet pigtail. The outlet pigtail is located on the portion of the tube outside of the heated length on an uncovered roof open to the atmosphere. The tube material is made of the same material as the heated length which is centrifugally cast length which is a centrifugally cast material mostly 25Cr/35Ni/Nb or with Micro-alloy additions. In this scenario, the process gas can also reach its dew point around 300-400 °F and cause “condensation”. See Figure 2.

The cyclic stresses brought on by these variations in temperature result in the damage mechanism as “thermal fatigue”. In both Case I and Case II, the defects manifest themselves in the form of circumferential cracks or pinhole cracks that initiate from the ID and propagate towards the OD resulting in a leak.

Typical Moderate Crack Signal

Top End Ultrasonic Inspection

Inlet Assembly Weld Failures

Several furnace designs utilize a dissimilar weld to connect the inlet assembly to the reformer tube. In some cases, this has led to cracking in the heat affected zone of the weld on the lower alloy side. MP has developed a customized testing device and procedure for testing these welds in some furnaces.

Procedures can be adapted for many furnace designs. This is an ultrasonic test incorporating special devices to assure complete coupling and accurate probe manipulation from the ID. Cracks are detected and sized allowing the continued safe operation of the furnace.

本网站使用 cookies

我们使用cookies来个性化内容和广告,提供交互媒体功能以及分析访问我们网站的流量。 我们还将与我们的社交媒体,广告部门以及分析合作伙伴共享有关您对我们网站使用情况的信息。 我们的合作伙伴可能会将这些信息与您提供给他们的信息或他们在使用服务过程中收集的其他信息相结合。

我们的cookies已经更改,因此需要重新征求同意。

您先前对我们Cookie的同意已经过期,因此需要重新征求您的同意。

必要的cookie能够帮助用户更好地浏览网站。这类cookie 被用来存储一些基本信息,例如登录网站,或者记录对单个cookie的同意。

名称 提供方 目的 有效期 类型
YSC YouTube

YouTube Video

Sitzung Cookie
CONSENT YouTube

YouTube Video

2 Jahre Cookie
VISITOR_INFO1_LIVE YouTube

YouTube Video

6 Monate Cookie
__hs_opt_out HubSpot notwendig

HubSpot入站分析程序使用此cookie来确保不会向退出后的用户再次征求同意。

13 个月 Cookie
__hs_do_not_track HubSpot notwendig

HubSpot入站分析程序使用此cookie来禁用对用户的跟踪

13 个月 Cookie
__hs_initial_opt_in HubSpot notwendig

HubSpot入站分析程序使用此cookie来存储对跟踪的同意。

7天 Cookie
hs_ab_test HubSpot notwendig

HubSpot入站分析程序使用此cookie在A / B测试期间始终将用户分配在同一组别。

进程 Cookie
*_key HubSpot notwendig

HubSpot入站分析程序使用此cookie来防止用户被迫重复登录同一内容。

14天 Cookie
hs-messages-is-open HubSpot notwendig

HubSpot入站分析程序使用此cookie保存聊天窗口小部件设置。

30分钟 Cookie
hs-messages-hide-welcome-message HubSpot notwendig

HubSpot入站分析程序使用此cookie来确保同一天只显示一次聊天的欢迎消息。

1天 Cookie
__hsmem HubSpot notwendig

HubSpot入站分析程序使用此cookie来存储用户的登录过程。

1年 Cookie
hs-membership-csrf HubSpot notwendig

HubSpot入站分析程序使用此cookie来防止登录过程被破坏。

进程 Cookie
hs_langswitcher_choice HubSpot notwendig

HubSpot入站分析程序使用此cookie来存储用户选择的语言。

2年 Cookie
__cfduid HubSpot notwendig

HubSpot入站分析程序使用此cookie来保证通过CDN / Cloudflare安全地传输数据。

进程 / 30天 Cookie
__cfruid HubSpot notwendig

HubSpot入站分析程序使用此cookie来保证通过CDN / Cloudflare安全地传输数据。

进程 Cookie
gits_cookie_accepted_* digiwerk GmbH

保存cookie横幅选择。

无限制 LocalStorage
fe_typo_user TYPO3

Wird vom CMS-System TYPO3 benötigt, um Benutzer am Frontend anmelden zu können.

1 Jahr Cookie
DataTables_* TYPO3

由CMS内容管理系统TYPO3 vebSaves保存用户设置以在后端显示数据。

无限制 LocalStorage
t3-tabs-* TYPO3

保存用户设置以在后端显示数据。

无限制 LocalStorage
be_typo_user TYPO3

CMS内容管理系统TYPO3所需,以允许用户登录到后端

1年 LocalStorage
PHPSESSID TYPO3

CMS内容管理系统TYPO3所需,以允许用户登录到后端

1年 Cookie

营销类的Cookie有助于识别网站的访问者。 在其它作用之外,这类cookie主要可以为用户显示更精准的广告和搜索结果。

名称 提供方 目的 有效期 类型
__hstc HubSpot

HubSpot入站分析程序使用此cookie来注册可以分配给用户的统计数据的唯一的标识。

13个月 Cookie
hubspotutk HubSpot

HubSpot入站分析程序使用此cookie来注册可以分配给用户的统计数据的唯一的标识。

13个月 Cookie
__hssc HubSpot

HubSpot入站分析程序使用此cookie来检测用户访问会话状态。

30分钟 Cookie
__hssrc HubSpot

HubSpot入站分析程序使用此cookie来检测用户访问会话状态。

进程 Cookie

统计类的cookie通过匿名收集和报告信息来帮助网站更好地了解访问者如何与网站互动。

名称 提供方 目的 有效期 类型
_pk_id.*.* Matomo

Matomo网络分析应用程序使用此cookie来存储有关用户的一些具体信息,例如唯一的访问者标识。

13个月 Cookie
_pk_ses.*.* Matomo

Matomo网络分析应用程序使用此cookie来保存短期cookie,这些cookie用来临时存储访问数据。

30分钟 Cookie
_pk_testcookie..undefined Matomo

Matomo网络分析应用程序使用此cookie来检查访问者的浏览器是否支持cookie

进程 Cookie

Cookies是网站使用的小型文本文件,可提高用户体验的效率。根据法律规定,如果操作本网站绝对必要,我们可能会将cookies存储在您的设备上。 对于所有其他cookie类型,我们都需要征求您的许可。本网站使用不同类型的cookies。 一些cookies是由第三方放置在我们的网页上。